It is the final product that would be applied to a die prior to the formation of the wax pattern. It is an ideal release agent for wax, porcelain, and composite materials.

INDICATION:

• Used in casting as a releasing agent for the moulds from the cast.
• It is the final product that would be applied to a die prior to the formation of the wax pattern.
• It is an ideal release agent for wax, porcelain, and composite materials.
• Increases film formation and wetting on the mold surface at the very high temperatures produced during the die casting process
• Excess of die lubricant  fails to evaporate, leading to porosity inside the casting and poor surface finishing of the part.
• Ideal release agent for wax.

• ✓Giomer-based bulk-fill — no separate base layer needed
• ✓Fluoride-releasing and recharging for caries protection
• ✓Radiopaque — easily detectable on X-rays
• ✓Ideal for Class I and II cavities
• ✓4mm cure depth — saves chair time significantly
• ✓Low polymerization shrinkage — reduces sensitivity